Easy To Install MR type CT couch top For CT machine

Product Information:

1. Registered Name: Positioning and Fixation for Radiation Therapy

2. Product ID: YC-KIII

3. Model: YC-DF134WMR

4. Glass Fiber material

5. Shape size: 530*2000*20mm

6. Can be compatible with Varian Linac couchtop

Instructions

1. Please ensure the CT machine in the level of state and the arc of the CT is not deformation;

2. Please ensure the CT Bed-Board with complete accessories is free from damage.

Installation Steps

1. Loosen the screw on the back of the CT Bed-Board ( Don't need to twist the screw off);

2. Put the CT Bed-Board on the arc of the CT;

3. Adjust the CT Bed-Board in the center of the position;

4. Push the slider on the back of the CT Bed-Board by hand or other tools, in order to make the slider and the edge of the circular arc can fit together;

5. Use the pen to mark the position of the slider at this time;

6. Remove the CT bed board from the CT machine and adjust the slider to the marked position;

7. Tighten the screws and installation is finished.