Product Information:
1. Registered Name: Positioning and Fixation Cushion for Radiation Therapy
2. Product ID: YC-ZII
3. Model: YC-DF147
4. Material: PVC nylon fabric bag
5. Shape Size: we can customize any kinds of sizes.
Product property:
1. The black protective cap on the front end of the cushion, that can prevent gas mouth collision caused the leakage in handling process, at the same time the cap also have the effect of secondary seal;
2. The release valve is one way and self-sealing;
3. The surface of the cushion is nylon fabric, so it is feels soft and comfortable.
Structure:
The cushion consists of PVC nylon fabric bag; EPS grains and release valve.
Usage:
1. Load the cushion on the treatment bed with flatting;
2. Fix the patient on the cushion;
3. Connect the side of the tube without air exhaustor with the vacuum pump;
4. Connect the release valve with the air exhaustor in the tube (when you hear “pa”, it means the release valve and the air exhaustor connected successfully);
5. Cover the cap is finished.
Matters need attention:
1. Product should be stored in clean, ventilated and dry inside storeroom, please don’t be mixed with the harmful and toxic substance in the same room;
2. Used under 10 ~ 40 ℃ can effectively prolong the service life.
Product Information:
1. Registered Name: Positioning and Fixation Cushion for Radiation Therapy
2. Product ID: YC-ZII
3. Model: YC-DF147
4. Material: PVC nylon fabric bag
5. Shape Size: we can customize any kinds of sizes.
Product property:
1. The black protective cap on the front end of the cushion, that can prevent gas mouth collision caused the leakage in handling process, at the same time the cap also have the effect of secondary seal;
2. The release valve is one way and self-sealing;
3. The surface of the cushion is nylon fabric, so it is feels soft and comfortable.
Structure:
The cushion consists of PVC nylon fabric bag; EPS grains and release valve.
Usage:
1. Load the cushion on the treatment bed with flatting;
2. Fix the patient on the cushion;
3. Connect the side of the tube without air exhaustor with the vacuum pump;
4. Connect the release valve with the air exhaustor in the tube (when you hear “pa”, it means the release valve and the air exhaustor connected successfully);
5. Cover the cap is finished.
Matters need attention:
1. Product should be stored in clean, ventilated and dry inside storeroom, please don’t be mixed with the harmful and toxic substance in the same room;
2. Used under 10 ~ 40 ℃ can effectively prolong the service life.
